ERP integration in window manufacturing
No more manual data entry
In Logikal, complete constructions are created with all the required components - from profiles to fittings to seals and glass. But from a fully digital process, a manual intermediate step suddenly arises: transferring the data into the ERP system. What at first glance seems like routine is in practice one of the biggest efficiency losses in window, door and façade construction.
Duplicated Work and Error-Prone Bills of Materials
In many companies the data landscape is fragmented. Design and ERP exist side by side, but without a real connection. This means concretely: The bills of materials created in Logikal are not automatically carried over, but must be re-created or adjusted in the ERP system. Each item, each screw and each gasket is checked individually or re-entered.
This process costs not only time, but also carries significant risks. Even small deviations can lead to orders being incomplete or wrong components ending up in production.
The bill of materials, as the central data basis, is particularly critical. It determines which materials are ordered, which costs are calculated, and which production processes are initiated. If it is faulty, it directly affects the entire process.
This is how typical problems arise:
- Orders that have to be corrected
- Production delays due to missing parts
- Inquiries between departments
- Additional coordination effort
And above all: unnecessary duplicate work.
Why manual data transfer is no longer up-to-date
The window, door, and facade construction industry is increasingly moving toward complex, variant-rich projects. At the same time, the demands for speed, quality, and cost efficiency are increasing. In this environment, manual processes quickly reach their limits. Because every time data must be transferred from one system to another, a so-called media break occurs. Information is lost, altered, or delayed as it is passed along. The result is inefficient processes and a lack of transparency.
In addition, modern companies are increasingly relying on end-to-end digital processes. Individual standalone solutions that do not communicate with each other no longer fit into a scalable system landscape. Those who continue to rely on manual data entry will inevitably be slower and more prone to errors than necessary.
End-to-end ERP integration with Logikal
With Logikal you create the foundation for a seamless data flow between design and ERP system. Instead of entering data multiple times, they are used where they originate. This means: The information generated in the design process is automatically transferred into your ERP and is immediately available there for all further processes.
In practice, this is remarkably simple. You continue to work in Logikal as usual and create your designs including all relevant components and information. In the background, the interface ensures that these data are transmitted in a structured and complete manner to your ERP system.
This includes:
- complete bills of materials
- material requirements
- line-item and order data
- costing information
Whether purchasing, production planning, or manufacturing, all areas access the same database. Manual intermediate steps are eliminated entirely.
Your benefits in everyday life.
No duplicate data entry
Designed once – used everywhere. You save valuable time and minimize manual effort to a minimum.
Error-free bills of materials
The bill of materials comes directly from the design. No typos, no deviations, no inconsistencies.
End-to-end processes
From planning to production, all systems access the same data base.
Faster order processing
Your processes run automatically in the background - without delays due to manual interventions.
More focus on your core business.
Your employees focus on design, planning and customers—not on data entry.
Greater Transparency and Planning Reliability
All departments involved work with up-to-date and consistent data. This improves cross-functional alignment and enhances planning reliability throughout the entire organization.
From an isolated system to an end-to-end process chain
The integration of Logikal into your ERP system is more than just a technical interface. It is a central building block on the path to end-to-end, efficient processes. Instead of capturing data multiple times and relaying it between systems, a networked process landscape emerges in which information flows automatically.
The result is a significantly higher process quality – from the initial design to the final implementation. Especially for companies in the window, door and façade construction industry, this means a decisive competitive advantage: faster response times, lower error rates, and better predictability.
Your data flow as the key to efficiency
Manual data transfer is one of the processes that is often tolerated for a long time, even though it has significant drawbacks. The solution is obvious: If data already exists digitally, it should also be processed digitally.
With a seamless ERP integration via Logikal you create exactly this connection. You avoid duplicated work, reduce sources of errors, and establish a consistent data foundation across all processes. The result is a workday that is not only more efficient but also significantly more transparent and reliable.
Get to know Logikal with no obligation
Start the interactive demo tour now — no installation or commitment required.
Create your first window and see immediately how you can efficiently implement your constructions.
FAQ: Frequently Asked Questions about ERP Integration in Window Manufacturing
What is meant by ERP integration in window construction?
ERP integration denotes the seamless connection between design software and ERP system. The goal is to automatically transfer data such as bills of materials, material requirements, and order information, without manual intermediate steps.
What risks arise from the lack of system integration?
Without integration, data silos occur between design and ERP. This leads to duplicate data entry, inconsistent data, lack of transparency, and delayed processes.
How does an ERP interface improve processes in window manufacturing?
An ERP interface ensures seamless data flows. Bills of Materials and order data are automatically transmitted, thereby speeding up processes, reducing errors, and ensuring that resources are used efficiently.
What data should be transferred between CAD and ERP?
Typically the following data are transmitted:
- Bills of Materials (BOMs)
- Material requirements
- Order and line-item data
- Costing information
- Production-related data
How does Logikal support ERP integration?
Logikal enables the automated transfer of engineering design and BOM data to ERP systems. This eliminates manual data entry, and all systems work with a unified database.
Which ERP systems can Logikal be connected to?
Logikal offers interfaces to a wide range of ERP systems that can access the data via mySQL/API. This allows companies to integrate their existing system landscape and create end-to-end processes.
How does automated BOM transfer affect production?
Automatically generated BOMs are consistent and complete. This reduces production errors, improves material planning, and ensures smoother operations.
Is the integration worthwhile for smaller businesses as well?
Yes. In particular, small and medium-sized enterprises benefit from time savings, reduced errors, and better planning that result from automated processes.
How quickly does an ERP integration pay for itself?
The amortization depends on company size and process complexity. In practice, integration solutions often pay for themselves quickly through saved labor time, lower error costs, and more efficient processes.